1/2 wave silver rod mounting
-
Davec
- New to the Scene
- Posts: 4
- Joined: Sat Dec 22, 2012 3:44 pm
- CB Handle: Zippy (long time ago)
- Location: Bacup Lancashire
Hey people just got a 1/2 wave silver rod just wondering can i just bolt it to my chimney or am I best using a stand off bracket or something please help need to get back on the air
-
andy@thunderpole.co.uk
- Site Admin
- Posts: 1142
- Joined: Tue Mar 14, 2006 4:53 pm
- Location: Northampton
- Contact:
Hi,
You are best off using a stand-off bracket, or we sell a lashing kit which can be attached to a chimney too... http://www.thunderpole.co.uk/homebase-fittings.html
Andy
You are best off using a stand-off bracket, or we sell a lashing kit which can be attached to a chimney too... http://www.thunderpole.co.uk/homebase-fittings.html
Andy
-
wildfire
- Motor Mouth!
- Posts: 335
- Joined: Tue Apr 22, 2008 7:08 pm
- CB Handle: wildfire.
- Location: United Kindom.
hi dave
good choice of antenna buddy if you put 3 to 4 Bamboo canes in to your antenna as the canes will stop the silver rod from bending & one stand-off bracket & also weather proof tape around the joints over the jubilee clips the tape will stop rain from getting inside the silver rod as long as the tape is water proof
good choice of antenna buddy if you put 3 to 4 Bamboo canes in to your antenna as the canes will stop the silver rod from bending & one stand-off bracket & also weather proof tape around the joints over the jubilee clips the tape will stop rain from getting inside the silver rod as long as the tape is water proof
