Low SWR reading
Posted: Tue May 06, 2014 7:27 pm
Hi all
Being a bit new to this CB stuff, I hope that this is not a stupid question...
I'm running a tti551 CB radio in my car with a 1.5 meter springer aerial mounted on a body mount and snail connector.
It has been running fine, with an SWR reading of around 1.2 to 1.5 and to obtain this, I trimmed it to lower the reading.
However, my chrome antenna was going rusty so I decided to go with a colour-coded antenna to match the car....(yeah I know).!
I fitted the antenna and duly checked the SWR reading, I was surprised to see that the needle hardly moves when I key the mike.
Is this something I should worry about ?
Will I still be able to receive and transmit ok over the same sort of distances ?
Hope you can help...
Being a bit new to this CB stuff, I hope that this is not a stupid question...
I'm running a tti551 CB radio in my car with a 1.5 meter springer aerial mounted on a body mount and snail connector.
It has been running fine, with an SWR reading of around 1.2 to 1.5 and to obtain this, I trimmed it to lower the reading.
However, my chrome antenna was going rusty so I decided to go with a colour-coded antenna to match the car....(yeah I know).!
I fitted the antenna and duly checked the SWR reading, I was surprised to see that the needle hardly moves when I key the mike.
Is this something I should worry about ?
Will I still be able to receive and transmit ok over the same sort of distances ?
Hope you can help...