Another swr post

General Mobile CB antenna advice and troubleshooting
0xandy
Good Buddy
Good Buddy
Posts: 10
Joined: Fri Jul 14, 2023 10:06 pm

Funny you should say that as I was about to suggest the same thing. Reason being I have been playing about with it and lengthened the whip as I cannot shorten it without cutting it. And lo and behold once I lengthened it the swr was higher on 1 and 40 than it was with whip in lowest position. For your reference the adjustment grub screw is in the same place above the coil as on a base loaded antenna, it’s just the coil is higher up. Need to get a good set of pliers. Will take my time and follow your advice and report back. Many thanks hair bear
User avatar
Hair Bear
Chatter Box
Chatter Box
Posts: 126
Joined: Tue Jun 02, 2020 6:04 pm

The steel is amazingly hard, eye protection is advised. Take a tiny amount at a time.
One person in ten understands binary. The other one doesn't. :wink:
Post Reply