cobra 25 ltd st
-
tranexneil
- New to the Scene

- Posts: 5
- Joined: Mon Aug 13, 2007 10:16 pm
Hi,
Check that wax hasnt got into RV401 next to the vco can.
Could actually be that the DEV is set too high making it sound awfull..
One way to prove my point is to turn down the front panel mic gain a bit and get an honest rig check !
Does it have its original mic ?
A properly set up Cobra will perform well in most conditions.
Regards
Neil
Check that wax hasnt got into RV401 next to the vco can.
Could actually be that the DEV is set too high making it sound awfull..
One way to prove my point is to turn down the front panel mic gain a bit and get an honest rig check !
Does it have its original mic ?
A properly set up Cobra will perform well in most conditions.
Regards
Neil
-
east coast cb'er
- Good Buddy

- Posts: 22
- Joined: Sun Jan 06, 2008 2:16 pm
- Location: essex
I had a cobra 29 in the summer it was ok but the channel selector started getting stiff and found it a bit clumsy to use so i sold it and now back using my old skool rigs

